TP-Link Archer A50, Руководство пользователя

Страница: 92 / 121

87
Chapter 5 Configure the Router in Access Point Mode
3. Customize guest network permissions.
•
Allow Guest To Access My Local Network - If enabled, guests can access the
local network and manage it.
• Guest Network Isolation - If enabled, guests are isolated from each other.
• Enable Guest Network Bandwidth Control - If enabled, the Guest Network
Bandwidth Control rules will take effect.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control page.
4. Select a band and enable the Guest Network function.
5. Create a network name for your guest network.
6. Configure the Security type. To configure a secure network, select WPA/WPA2 -
Personal and create a password for the guest network.
7. Click Save .
5. 8. DHCP
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.