Toyotomi CTG-228BRM, Руководство пользователя

Страница: 20 / 124

20
GB
When selecting « » with remote controller, temperature indicator on indoor
unit displays indoor ambient temperature.
When selecting «
» with remote controller, temperature indicator on indoor
unit displays indoor ambient humidity.
15
TIMER
button
• At ON status, press this button once can set TIMER OFF. The character
of HOUR and OFF will
fl ash. Press «+» or «-» button within 5s can adjust
the time of TIMER ON. After each pressing of «+» or «-» button, time will
increase or decrease half an hour. When holding «+» or «-» button, 2s
later, the time will change quickly until to reach to your required time. After
that, press «TIMER» button to con
fi rm it. The character of HOUR and OFF
won’t fl ash again.
Cancel TIMER OFF: Press «TIMER» button again under TIMER OFF
status.
• At OFF status, press this button once can set TIMER ON. Please refer
to TIMER off for detailed operation. Cancel TIMER ON: Press «TIMER»
button again under TIMER ON status.
NOTE
• Time setting range: 0.5-24 hours.
•
Time interval between two operations can’t exceed 5s. Otherwise, remote
controller will exit the setting status automatically.
16
LIGHT
button
Press this button to control the LED status on the displayer, the circulation
change is as follow:
When selecting « » (Auto LED) with remote controller, LED indicator on
indoor unit will adjust the luminance automatically according to the ambient
intensity of illumination.
16
SLEEP
button
Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3 ( ) and
cancel the Sleep, circulate between these, after electri fi ed, Sleep Cancel is
defaulted.
Sleep 1 is Sleep mode 1, in Cool modes; sleep status after run for one hour, the
no display no display
LED on Auto LED LED off LED off