Toyotomi CTG-228BRM, Руководство пользователя

Страница: 16 / 124

16
GB
4 button
Press « + » or « - » button once increase or decrease set temperature 1 ℃ ( ℉ ).
Holding « + » or « - » button, 2s later, set temperature on remote controller
will change quickly. On releasing button after setting is
fi nished, temperature
indicator on indoor unit will change accordingly.
The temperature cannot be adjusted in AUTO mode.
5
COOL
button
Press this button, unit will operate in cool mode.
6
HEAT
button
Press this button, unit will operate in heat mode.
7 button
Press this button can select up & down swing angle. Fan blow angle can be
selected circularly as below:
When selecting « », air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.
When selecting «
», air conditioner is blowing fan at fi xed
position. Horizontal louver will stop at the fi xed position.
Hold « » button above 2s to set your required swing angle. When reaching
your required angle, release the button.
NOTE
Press this button continuously more than 2s, the main unit will swing back and
forth from up to down, and then loosen the button, the unit will stop swinging
and present position of guide louver will be kept immediately.
Under swing up and down mode, when the status is switched from off to
« » , if press this button again 2s later, « » status will switch to off status
directly; if press this button again within 2s, the change of swing status will also
depend on the circulation sequence stated above.
8 button
Under “Cooling mode”:
By pressing the «Humidity Control» button « » on remote controller once, the
no display
(horizontal louvers stops
at current position)