Toyota TNS 700 Скачать руководство пользователя страница 146

Страница: 146 / 178

127

AUDIO SYSTEM

Selecting a station

Tune in the desired station using one of the

following methods.

Preset tuning:

Touch the channel selector

(1 — 6) for the station you want. The touch--

screen button is highlighted and the station

frequency appears on the screen.

Seek tuning:

Push the

“ ”

button

“SEEK/TRACK”

. The radio will begin

seeking up or down for a station of the near-

est frequency and will stop when a station is

received. Each time the button is pushed,

the next available station will be played.

Automatically preset

AST (Autostore)

This button is used to automatically preset

frequencies of up to 6 radio stations for each

band. (FM3, LW and MW). Touch

“AST”

un-

til a beep is heard. To cancel it, touch the but-

ton again.
If you use

“AST”

in the FM mode (FM1, FM2,

FM3), it will be automatically stored in FM3.

For example, even if you autostore in FM1,

the mode will change to FM3.
If the radio cannot seek out any stations, it

will receive the frequency before you oper-

ated “AST”.

RDS (Radio Data System)

AF (Alternative Frequency) function:

A station providing good reception is auto-

matically selected if current reception wors-

ens.

Each touch of “AF” changes as in the fol-

lowing:
AF--ON, REG--OFF mode:

“AF” appears on

the screen. For switching over to the broad-

casting station providing good reception

within the same RDS network; convenient for

following the appropriate stations in a wide

region.

AF--ON, REG--ON mode:

“AF” and “REG”

appear on the screen. For switching over to

a broadcasting station within the same local

program network.

AF--OFF, REG--OFF mode:

The AF function

does not work.

TA (Traffic Announcement) function:

The tuner will automatically seek a station

that regularly broadcasts traffic information

and the station broadcasts when the traffic

information program starts.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Содержание TNS 700



















































































































































































Результаты поиска

Содержание TNS 700

Отзывы:

Похожие инструкции для TNS 700

Бренды по названию

Популярные бренды

Toyota TNS 700, Руководство пользователя

Результаты поиска

Содержание TNS 700

Отзывы:

Похожие инструкции для TNS 700

Бренды по названию

Популярные бренды