SCION tC
2008-
ILLUMINATED
DOOR
SILLS
Procedure
Page 5 of 17 pages
Issue: C 06/13/07
(l)
Carefully lift up the center console panel and
disconnect the cigarette lighter connector and
the harness clip. Set console panel aside.
(Fig. 1-12)
(m)
Remove the center cluster panel. (Fig. 1-13)
(1)
Disconnect the connector behind the
center cluster panel.
(n)
Remove the head unit. (For DIO)
(1)
Use 10 mm socket to remove nuts and
Phillips screw driver to remove screws.
(Fig. 1-14)
(2)
Remove connectors at rear and remove
head unit.
2.
Install Driver Side Door Sill
(a)
Locate and disconnect the 30 pin connector
on the junction block (behind fuse box
cover). (Fig. 2-1)
(b)
Install a T-Tap to the orange wire (pin # 21)
on the 30 pin connector, about 1 inch from
the connector end. (Fig. 2-1)
(1)
Using pliers, make sure that T-Tap is
snapped in correctly.
Fig.
1-13
Nylon Panel Removal Tool
Center Cluster Panel
Fig.
1-14
10 mm Socket, Phillips Screwdriver
Screws
Nuts
Fig.
1-12
Cigarette Lighter Connector
Harness
Clip
Fig. 2-1
Pliers
30 pin connector
Wire side view
Pin #21
Orange
