TOYOTA TUNDRA 2016
-
TONNEAU COVER
Procedure
Page 3 of 11 pages
Issue: C 04/18/2017
DIO
(4)
From the back side of the accessory rail,
use a plastic mallet to lightly tap the
locator peg towards the larger opening in
the “keyhole” in the rail (Fig. 1-3).
Remove and discard the peg.
NOTE:
Remove two locater pegs per rail.
2.
Install the Tonneau Cover Side Rails onto the
Truck Bed.
(a)
Slide the clamps into the side rail grooves
(Fig. 2-1).
(1)
Spread the clamps evenly along the
length of the rails.
(2)
The exact location will be determined
when installing the rails onto the truck
bed.
(b)
Place the tonneau side rail on the truck bed
(Fig. 2-2).
NOTE:
Place the side rails on the truck bed so
that the endcap containing the drain is toward the
front of the bed.
(c)
Position the tonneau side rails on the truck
bed 1” (25.4mm) back from the bed edge
(Fig. 2-3).
Fig. 1-3
Plastic mallet
Fig. 2-1
Fig. 2-2
Fig. 2-3
Tape measure
1 inch
