manualshive.com logo in svg

Toyota Matrix 2012, Руководство пользователя, Страница: 83 / 481

Поделиться
Скачать
Toyota Matrix 2012 Скачать руководство пользователя страница 83

98

1-7. Safety information

While pushing the child seat
down into the rear seat, allow the
shoulder belt to retract until the
child seat is securely in place. 

After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.

■

Forward facing 

⎯ 

Convertible seat

Place the child seat on the seat
facing the front of the vehicle.

Run the seat belt through the
child seat and insert the plate
into the buckle. Make sure that
the belt is not twisted.

Fully extend the shoulder strap
and then allow it to retract
slightly into the ALR lock mode.

Lock mode allows the seat belt to
retract only.

STEP

4

STEP

1

STEP

2

STEP

3

Содержание Matrix 2012


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов