manualshive.com logo in svg

Toyota Matrix 2012, Руководство пользователя, Страница: 279 / 481

Поделиться
Скачать
Toyota Matrix 2012 Скачать руководство пользователя страница 279

297

3-5. Using the interior lights

3

Inte

rior fe

atures

Interior light

“DOOR” position

Off

On

■

Illuminated entry system

Vehicles with moon roof

When the light switch is in the “DOOR” position, the interior lights and per-
sonal/interior lights automatically turn on/off according to the engine switch
position, whether the doors are locked/unlocked (with power door lock sys-
tem) and whether the doors are open/closed.

Vehicles without moon roof

When the light switch is in the “DOOR” position, the interior lights automati-
cally turn on/off according to the engine switch position, whether the doors
are locked/unlocked (with power door lock system) and whether the doors
are open/closed.

■

To prevent the battery from being discharged

If the interior lights and personal/interior lights (vehicles with moon roof)
remain on when the door is not fully closed and the light switch is in the
“DOOR” position, the lights will go off automatically after 20 minutes.

■

Customization that can be configured at Toyota dealer

Settings (e.g. The time elapsed before lights turn off) can be changed. 
(Customizable features 

→

P. 485)

Interior light

Содержание Matrix 2012


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов