manualshive.com logo in svg

Toyota Matrix 2012, Руководство пользователя, Страница: 328 / 481

Поделиться
Скачать
Toyota Matrix 2012 Скачать руководство пользователя страница 328

347

4-3. Do-it-yourself maintenance

4

Mainten

ance an

d ca

re

CAUTION

■

Pre-driving check

Check that the hood is fully closed and locked.
If the hood is not locked properly, it may open while the vehicle is in motion
and cause an accident, which may result in death or serious injury.

■

After installing the support rod into the slot

Make sure the rod supports the hood securely from falling down on to your
head or body. 

NOTICE

■

When closing the hood

Be sure to return the support rod to its clip before closing the hood. Closing
the hood with the support rod up could cause the hood to bend.

Содержание Matrix 2012


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов