manualshive.com logo in svg

Toyota Matrix 2012, Руководство пользователя, Страница: 27 / 481

Поделиться
Скачать
Toyota Matrix 2012 Скачать руководство пользователя страница 27

42

1-3. Adjustable components (seats, mirrors, steering wheel)

■

Active head restraints

Even small forces applied to the seatback may cause the head restraint to
move. Pushing up a locked head restraint forcibly may appear the head
restraint inner structure. These do not indicate problems.

CAUTION

■

Seat adjustment

●

Be careful that the seat does not hit passengers or luggage.

●

Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt. 
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.

●

After adjusting the seat, make sure that the seat is locked in position.

Inner 

structure

During

rear-end

collision

Содержание Matrix 2012


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов