Toyota Matrix 2012 Скачать руководство пользователя страница 152

Страница: 152 / 481

168

2-5. Driving information

■

TWR (Trailer Weight Rating)

The maximum allowable gross
trailer weight. The gross trailer
weight is the sum of the trailer
weight and the weight of the
cargo in the trailer.

TWR is calculated assuming
base vehicle with one driver, one
front passenger, towing package
(if available), hitch and hitch sys-
tems (if required).

Additional optional equipment,
passengers and cargo in the vehi-
cle will reduce the trailer weight
rating so as not to exceed
GCWR, GVWR and GAWR.

■

Unbraked TWR (Unbraked Trailer Weight Rating)

The trailer weight rating for tow-
ing a trailer without a trailer ser-
vice brake system.

(With brakes)

(Without brakes)

Содержание Matrix 2012


































































































































































































































































































































































































































































































Результаты поиска

Содержание Matrix 2012

Отзывы:

Toyota Matrix 2012, Руководство пользователя, Страница: 152 / 481

Результаты поиска

Содержание Matrix 2012

Отзывы: