Toyota 1HD-T, Руководство по ремонту

Страница: 329 / 348

A-12 SERVICE SPECIFICATIONS - Fuel System
Specification (Cont'd)
Injection pump
(cont'd)
Plunger adjusting shim thickness
1HZ and 1HD-T (for pre-stroke)
Flyweight holder thrust clearance
Governor shaft protrusion
Governor gear adjusting washer thickness
Boost compensator adjusting shim thickness
1.90 mm 0.0748 in.
1.95 mm 0.0768 in.
2.00 mm 0.0787 in.
2.05 mm 0.0807 in.
2.10 mm 0.0827 in.
2.15 mm 0.0846 in.
2.20 mm 0.0866 in.
2.25 mm 0.0886 in.
2.30 mm 0.0906 in.
2.35 mm 0.0925 in.
2.40 mm 0.0945 in.
2.45 mm 0.0965 in.
2.50 mm 0.0984 in
2.55 mm 0.1004 in.
2.60 mm 0.1024 in.
2.65 mm 0.1043 in.
2.70 mm 0.1063 in.
2.75 mm 0.1083 in.
2.80 mm 0.1102 in.
2.85 mm 0.1122 in.
2.90 mm 0.1142 in.
2.94 mm 0.1157 in.
2.99 mm 0.1177 in.
3.04 mm 0.1197 in.
3.09 mm 0.1216 in.
3.14 mm 0.1236 in.
3.19 mm 0.1256 in.
0.1 5 - 0 . 3 5 mm 0.0059-0.0138 in.
0 . 5 - 2 . 0 mm 0.020 - 0.079 in.
1.05 mm 0.0413 in.
1.25 mm 0.0492 in.
1.45 mm 0.0571 in.
1.65 mm 0.0650 in.
1.85 mm 0.0728 in.
1.1 mm 0.039 in.
1.3 mm 0.051 in.
1.5 mm 0.059 in.
1.7 mm 0.067 in.
1.9 mm 0.075 in.
2.1 mm 0.083 in.
2.3 mm 0.090 in.
2.5 mm 0.098 in.
2.7 mm 0.106 in.
2.9 mm 0.114 in.
3.1 mm 0.122 in.
3.3 mm 0.130 in.