28
○
Method of hand adjustment
The procedure of the adjustment method is shown below.
If the power supply of an inverter is turned ON, D.C. voltage will be
displayed on the display for indication of DB unit. Check that
LED"RUN" is not on and push the "FNC/SET" button.
LED"FNC/SET" lights up and "F10" setting mode is displayed. "UP"
button is pushed
3 times
and changed into "F40" setting mode.
"F40" set-up mode is displayed.
"FNC/SET" button is pushed once and it switches to set-up item "Gain
of Vdc display".
Set-up item " Gain of Vdc display " is displayed.
Push "UP" or the "DOWN" button and adjust a gain. Set up a gain and
push the "FNC/SET" button.
Set-up item " Offset of Vdc display " is displayed.
Push "UP" or the "DOWN" button and adjust a offset. Set up a offset
and push the "FNC/SET" button.
"F40" set-up mode is displayed. The hand adjustment of a D.C.
voltage display gain / offset is completion above.
Содержание VFDB2009 Series
Страница 1: ...VFDB2009 Operation Manual...
