Toyama TDWT73(E), Руководство пользователя

Страница: 25 / 56

25
10. CHECKS BEFORE USING THE MICRO TRACTOR
Check before operation
•
Securely tighten all parts and components of the equipment.
•
Fill tanks with fuel, lubricating oil and water.
•
Adjust tension belts if necessary.
•
Check tire pressure
Operation information
Operation
DIFFERENT TIMING TIME
SPEED (1-6) MARCH TOTAL
1 2 3 4 5 6 (hours)
Use without load 1/2 h 1/2 h 1/2 h 1/2 h 1 1 4
Use 1/3 of the load 3 3 3 3 - - 12
Use 2/3 of the load 4 4 4 4 - - 16
1)No load means the use of the micro tractor without any attached
implements
2) Turn in the first and second gear with the implement added:
1/3 load means 5 -6 cm depth of cultivation
2/3 load means 7 -8 cm of cultivation depth
3) Run in 3 and 4 gear with the added plow tool
1/3 load means 7 - 9 cm depth of plow
2/3 load means 10 - 13 cm depth of the plow
Points to note during the operating test:
•
Perform repeated steering and braking maneuvers. Make sure all controls are working
correctly;
•
After the test run, substrate the equipment to technical maintenance and inspection
according to the first-class maintenance program. The lubricating oil in the gearbox
should be replaced as indicated in the second-class maintenance program;
V-BELT TENSION ADJUSTMENT
The 3 belts must be of the same length and their tension must be tightly adjusted because if
they are too loose or too tight they will lead to a decrease in the life of the belts and equipment.
Se estiverem muito frouxas deslizarão na polia, o que resultará em perda de potência.