CAEDMON ECO DEISGN SMOKE CONTROL ISSUE No. 02 10/10/2017
12
TO REPLACE THE BRICKS & BAFFLES
Firstly remove the fuel guard then the first right hand side brick.
Next remove the first baffle then the first left hand brick.
Slightly push the second baffle up over, then using the riddling tool gently prise one
of the side slip bricks out (see picture below)
The second side brick can now easily be removed.
Repeat to remove the other side brick. Remove top baffle.
Loosen dome nut on the tertiary air control (at the left hand side of the stove body),
remove the top rear brick.
Then the remaining rear bricks and air tube can be removed through the front of the
stove.
Please note the correct position for the first baffle is with the name to the top and the
lip at the front facing up. The second baffle has the gap to the rear and the name on
the underside
