Fig. #15
8
10
10
9
This fi replace may be recessed up to a
maximum depth of 6”, this recess must
be constructed from non combustible
material. The space between the
outside lintels and the fi rebox must be
completely free of any obstructions or
debris and the window with trim fi tted
must be able to move freely. No build-
ing material is permitted to protrude
past the lintel bars attached to the fi re-
place under ANY circumstance.
Fig. #15b
FRAMING
EDGES
GLASS
FRAME
NON COMBUSTIBLE
FINISH MATERIAL
2. Attach the Assembled Frame to the
Unit
•
Align the assembled frame to the unit
framing brackets. (Fig #13) Attach at
the fastening points through the
access holes in the outer side studs
(3).
3. Secure to Existing Framing
•
Bend out the tabs 90 degrees before
inserting the unit into its framed housing
(Fig. #14).
•
Secure the frame assembly to the wood
frame through the tabs.
4. Install Non-Combustible Board Top
and Sides
•
Use drywall screws to install the
non-combustible board top ,
bottom ,sides top center and
bottom center . (Fig. #15)
Fig. #13
Fig. #14
11
8
9
9
8
10
12
TCWS.54CE 200810-40
Содержание TCWS.54CE2
Страница 38: ...38 TCWS 54CE 200810 40 ...
