NOTE: Sheet metal parts have sharp edges, use caution when handling.
1. Frame Assembly
•
Place one of #4 as a top.
•
Place two of #6 into the top with the long edge facing up. Align the two holes and screw together with wafer screw #1.
•
Attach #2 and #3 with wide edge face up.
•
Attach #5 to #6 and #2.
•
Attach #7 to #2 using one screw through the top and one screw through the side at each end.
•
Place the one remaining piece of #4 at the bottom of the framing kit in the same manner as the top, screw them together and attach to the
inner steel studs.
•
Turn the framing kit over and secure all studs from the back.
2
2
3
3
4
4
5
6
6
7
FRONT VIEW
BEND OUT FRAMING
TABS TO FRONT
(Fig #14)
SCREW INTO
SIDE
SLOTS UP
Fig. #12
11
TCWS.38CE3 250313-44
