Town & Country Fireplaces TC36.OD, Инструкция по установке и эксплуатации

Страница: 11 / 40

Fig. #13a
5 9/16”
12”
50 1/4”
48 1/4”
20 13/16”
56 9/16”
29 3/8”
50 1/4”
79 15/16”
56 9/16”
IF FINISHING THE WALL ABOVE
THE UNIT WITH PAINT, THE
FRAMING KIT SHIPPED WITH THE
UNIT SHOULD BE DISCARDED.
IT IS RECOMMENDED TO USE FULL
SHEETS OF CALCIUM SILICATE
BOARD OR ITS EQUIVALENT AND
FULL LENGTH METAL STUDS TO
FINISH AND FRAME AROUND THE
UNIT.
FOLLOW THE MANUFACTURERS
MOUNTING AND FINISHING
INSTRUCTIONS CLOSELY.
NOTE: IT IS RECOMENDED TO PRE-
DRIL MOUNTING HOLES IN THE
BOARD PRIOP TO SECURING TO
THE FRAMING. THIS WILL PREVENT
THE BOARD FROM CRAKING.
NON-COMBUSTIBLE
BOARD
NON-COMBUSTIBLE BOARD DETAIL
Fig. #13
Fig. #14
Fig. #15
NON-COMBUSTIBLE MATERIALS
MUST EXTEND 12" ABOVE AND
5 9/16" TO THE SIDES OF THE
FRAMING EDGES.
MINIMUM COMBUSTIBLE
FRAMING DIMENSIONS
NOTE: FIREPLACE SHOULD BE IN ITS FINAL LOCATION BEFORE FRAMING.
NON-COMBUSTIBLE RECESSED
INSTALLATION DETAIL
STEEL STUDS
NON-COMBUSTIBLE
MATERIAL
50 1/4”
23 3/8”
3/4”
12 11/16”
Including Sheetrock
NON-COMBUSTIBLE
BOARD
NON-COMBUSTIBLE
BOARD
11
TC36.COD 102513-40
MAXIMUM FACING DEPTH