Town & Country Fireplaces Architectural Series, Руководство по установке

Страница: 45 / 60

There are two rows of LED lights in this fire feature, one row on each side of the burner. Each row of
LED lights is made of individual LED sections (Figure 67) which can be joined together using bridge
connectors to achieve the desired row length (Figure 68). Each row of sections also has its own main
electrical connector (Figure 69).
Figure 67: Individual LED section.
Removing an LED section
1. To remove an individual LED section or sections, begin by disconnecting the main power to the
fire feature at the main circuit breaker. Give time for the unit to cool down.
2. Remove the inner and outer glass plates.
3. Remove the glass media and the burner tray.
4. Remove the bridge connector of the LED section(s) to be replaced (Figure 70). These connector
tabs lift up much like the main electrical connector (Figure 69). In this way, individual LED
sections can be replaced without removing the entire row of LED sections from the fire feature.
5. The LED sections and rows are held in place by hold down tabs (Figure 71). These tabs can be
lifted up so that the LED section can be removed.
Figure 68: LED individual sections joined together.
Figure 69: LED connector.
LED Strip Replacement
45
031220-60 Architectural Series
100004782