Town & Country Fireplaces Architectural Series, Руководство по установке

Страница: 37 / 60

Figure 42: Raising top edge into the inner upper slot.
Figure 43: Lower the inside front plate into its slot.
3. Before removing the suction handle, shift the right side glass plate toward the rear wall so that
this glass plate will not interfere with the inside front glass plate while it is being installed
(Figure 40).
4. Repeat this procedure to install the inside front glass plate. Using the suction handles, insert the
lower edge of the inside front glass plate into the gap directly behind the furthest louver
(Figure 41).
5. Once the lower edge has been inserted into the gap, tilt the glass plate forward and raise the
upper edge into the upper inner slot (Figure 42).
6. Lower the inside front glass plate down into its lower slot (Figure 43). Center this glass plate.
7. Using a suction handle, gently shift the inside right hand glass plate forward in its slot until it just
touches the inside front glass plate (Figure 44).
Inside fr
ont plate
Inside
right pl
ate
Center front plate and then move the right side
plate toward front plate to reduce the corner gap.
Figure 44: Final position of inside glass plates.
37
031220-60 Architectural Series
100004782