tousek PULL T10, Руководство по монтажу и установке

Страница: 4 / 36

- 4 -
tousek / EN_PULL-T8-T10-T15-M-S_02 / 25. 03. 2020
Characteristics PULL T8, -T10, -T15
• Programmable control panel accessible from exterior with
illuminated display in english
• Direct connection of 8,2 kOhm contact barriers (safety sensing edges (2-channels)
• Three operating modes (impulse, automatic and dead man)
• Adjustable partial opening
• Built in control board in separate housing
• Safety system ARS (automatic reversal system)
• Self locking worm gear
• Emergency release, lockable with profile half cylinder (3 keys included) -
changeable, thus incorporation into an existing house key system is possible.
• Self learning end positions (limits)
• Drive unit (gearbox unit) made of steel and runs in an oil bath
• Permanently selflearning force
• Adjustable soft stop (no loss of force even with reduced revolution speed)
• worm gear and worm wheel made of tempered steel
•
1. General
Sliding gate operator PULL T8, -T10, -T15 / Master-Slave
Technical data
Sliding gate opener
PULL-
T8 T10 T15 T8 T10 T15
control board integrated max. drive 30m
Power supply 230V a.c., 50Hz duty cycle in S3 mode 40% 40–60%
max. current consumption
(excl. equipment)
1,6A 1,9A 2,2A Ambient temperature -20°C bis +40°C
Gear wheel Z20M4 Z16M4 Protection class IP44
max. gate weight 800kg 1000kg 1500kg Torque sensor
Spees 11m/min 9m/min
Art.no..
Master 11110430 11110640 11110680
Torque 25Nm 30Nm Slave 11110440 11110650 11110690
optional equipment
pluggable receiver • additional module für courtyard/control lamp • additional module for gate status •
bracket incl. top hat rail • radio transmission systemTX 310 • iinductive system TX 400i
Motor selection by using a spring scale T8 T10 T15
Attach the spring scale to the gate at approx. the height of the rack. Then pull
horizontally and without rocking at motor speed. Compare the max. detected
tractive force with the guide values listed on the right.
up to
30kg
up to
40kg
up to
60kg
General
During the development of the new operator generation Tousek PULL T8, -T10, -T15 special attention has been paid to a quick and simple in -
stallation and a troublefree operation, together with the proven quality and reliability. Accordingly, many clever details have been built into the
operator - from the automatic learning of gate end positions, to the control board with removable clamps an integrated safety sensing edge
analysis, to an easy programmable text display - which make it particularly user-friendly. The drive unit itself consists of an electric motor and
a worm gearing, accommodated in a robust aluminium housing, and - together with the integrated microprocessor control unit and the safety
reverse system ARS - forms a compact device with small overall dimensions. The safety reverse system ARS senses obstacles during open-
ing and closing of the gate and permits a continuous adjustment of the drive force. Following the Tousek tradition, all operator components have
been built in a particularly robust and resistant way to guarantee the safe and reliable operation even in the most adverse weather conditions.
Additional improvements are for example: control board with display is accesible from outside, the separate control board housing, which double
protects this sensible part, or an oil bath which ensures that the motor/gearing components can move in an optimal way in all temperatures with
perfect lubrication and cooling effect. The installation of the PULLT8 is possible for new or already exsting sliding gates in a simple and fast way.
Functions
The integrated control board has three operation modes : impulse mode (with button/switch function open and close), automatic mode
(automatic closing) and dead-man mode (the gate moves as long as the button/switch is pressed)
Not only the possibility of connecting a button/switch OPEN / CLOSE / STOP, photocells and a safety device, but also a pedestrian entry
button/switch which enables the partial opening of the gate. The system has 230V output terminals, for connecting a signal lamp. Further it´s
equipped with slots for a pluggable radio receiver and an additional module (for courtyard lamp or for evaluating the gate state).