tousek
/ EN_PULL-T8-T10-T15-M-S_02 / 25. 03. 2020
- 11 -
Warning
•
Before taking off the control cover, the
mains switch must be turned off!
•
If the control is power supplied, its inner part is under tension.
•
In order to avoid electrical strokes, the safety regulations have to be kept.
•
The device may only be connected by trained professionals.
•
The product is not suitable for installation in explosion-hazardous areas.
•
An all-pole disconnecting mains switch with a contact opening gap of min. 3 mm has to be foreseen. The gate
facility has to be secured according to the valid safety regulations!
•
IMPORTANT: The control lines (buttons, radio, photocells, etc.) have to be laid separately from the 230V lines
(supply line, motors, signal lamp).
