TOUGH-WORKS MM491G, Инструкция по эксплуатации

Страница: 5 / 20

4
SAFETY GUIDELINES
MM491G
Special Safety Rules For Belt
& Disc Sanders
1. Do not operate this machine until you have
read all of the following instructions.
2. Do not attempt to operate this machine until
it is completely assembled.
3. Do not turn ON this machine if any pieces
are missing.
4. If you are not familiar with the operation of
the machine, obtain assistance from a qual-
ified person.
5. It is highly recommended that this machine
be firmly mounted to a flat and secure work
surface or stand.
6. Always wear protective eyewear prior to op-
erating this machine.
7. Do not operate this machine if you are under
the influence of drugs and/or alcohol.
8. Remove all jewelry prior to operating this
machine.
9. Do not wear any gloves while operating this
machine.
10. Always make sure the power switch is in the
OFF position prior to plugging in the machine.
11. Always make sure the power switch is in the
OFF position when doing any assembly or
setup operation.
12. Always wear a dust mask and use adequate
dust collection and proper ventilation. Use of
sanders can produce harmful particles while
sanding certain types of woods.
13. The use of any accessories or attachments
not recommended may cause injury to you and
damage your machine.
14. This machine must be properly grounded.
15. Abrasive discs and belts should be the rec-
ommended width and length of the manufa-
cturer.
16. Always keep your face and hands clear of
moving parts such as belts and pulleys.
17.Keep power supply cords free of moving parts
of the sander. Damaged cords can result in
electric shock.
18. Maintain a 1/16” clearance between the sa-
nding disc, sanding belt and tables
19.Always support the workpiece with the table
or backstop.
20. Remove material or debris from the work area.
Keep work area neat and clean.
21.Keep these instructions for future reference.