12
Installation Completion Drawing
Bundling of cords
L=6' (1800 mm)
L=6' 6-3/4" (2000 mm)
L=4' 7-1/8" (1400 mm)
EN
GL
ISH
13
1. Connect the hose to the sub-tank.
* Use the connection hose for connecting
the tank and cut to the desired length to fit
between the sub-tank and the tank.
3. Connect the air deflation hose.
4. Attach the elbow to the front end of the air
deflation
hose and attach it to the wall with
the hose tie and wood screw.
* Do not block the elbow. It is the air bleed
point for the system. The soap will not
flow properly if the elbow is blocked.
2. Connect one end of the connection hose to
the coupling cap on the side of the tank.
INSTALLATION PROCEDURE - Sub Tank Unit
Sub-tank
Connection hose
Hose clamp
Hose clamp
Connection
hose
Elbow
Hose tie
Air
Wood Screw
Air deflation hose
y
Be sure that the hose tie is in position with
the air deflation hose and the elbow.
y
Be sure to install the elbow
between the
top of the sub-tank and the counter
.
When the elbow is installed lower than
the sub tank the soap overflows.
Check
Check
Caution
Be sure to tighten the hose connection with the
hose clamp to secure it into place.
Caution
Be sure to tighten the air deflation hose
securely with the hose clamp.
Caution
y
Do not have kinks or excessive bends in the
hose.
y
Check that all cap nuts are tight.
If loose, liquid leaks.
Check them periodically.
Hose clamp
Tank
Air deflation hose
EN
GL
ISH