Bowl Unit
(Approximately daily)
•
Toilet brush
•
Neutral toilet
detergent
•
Strongly acidic cleaners or strong alkaline
cleaners
•
Cleaners containing abrasive compounds
•
Fluoride-based detergent
(containing hydrogen
fl
uoride or
ammonium
fl
uoride)
•
Wire brush
•
Abrasive nylon scrubbing brush
1
Switch the breaker on the distribution board to OFF.
2
Clean with a toilet brush or a similar tool.
■
If the bowl unit is clogged
Vinyl sheet,
etc.
Keep 10 cm
or more
• Using plunger or similar, provide 10 cm or more clearance between the
top of the bowl unit and the water surface. Use commercially available
tools that are made for unclogging the bowl unit.
(May cause over
fl
ow of dirty water and water damage.)
■
If the
fl
oor is dirty
• Clean it with a well wrung cloth. (Not cleaning the
fl
oor may cause stains or corrosion.)
• Sitting is recommended to reduce splashing caused by standing and urinating.
3
Switch the breaker on the distribution board to ON.
•
The "Power" LED lights up.
Attention!
●
Be careful not to expose the top unit or the gap between it and the bowl unit to water.
(May cause water over
fl
ow into the room.)
●
Do not use any water repellant, stain-proo
fi
ng cleaner or surface coating agent.
These products would not damage the porcelain surface, but they may cover the porcelain surface and
reduce the effect of the built-in stain prevention technology.
31
Bowl Unit
Maintenance
Содержание NEOREST DH TCF9575 Series
Страница 52: ...51 3 Select or ENGLISH LANGUAGE ENGLISH Press LANGUAGE ENGLISH To return Reference...
Страница 75: ...74 MEMO...
Страница 76: ...75 MEMO...