TOTAL GYM 26000 OWNER’S GUIDE
OWNER’S GUIDE
TOT
AL
GYM 26000
800 541 4900 EFISPOR
TSMEDICINE.COM
9
INSTALL THE 3GRIP PULL-UP BAR.
Make sure the Folding Foot Holder is in the lowered
position. Position the 3Grip Pull-up Bar mounting
brackets on the upper rails over the holes on the
outside of the rails, 1/2" down from the top of the rail
(Figure 1). Pull both pins and slide the brackets over
the holes (Figure 2).
Release the pins and move the 3Grip Pull-up Bar until
both pins engage completely in the holes (Figure 3).
Your 3Grip Pull-up Bar is installed (Figure 4).
INSTALL THE PRESS BAR.
Remove the Folding Platform, Telescoping Squat Stand
and 3Grip Pull-up Bar.
Position the Press Bar mounting brackets, with the
quarter round plate on ladder side, over the holes on
the lower rail just above the base (Figure 1).
Pull the pins and slide the brackets over the holes
positioned as shown (Figure 2).
Release the pins (Figure 3) and adjust the Press Bar
until both the pins engage completely (Figure 4
).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Figure 2
Figure 3
Figure 4
