Total Control Greyline 2000 Series, Руководство по оборудованию

Страница: 28 / 37

Greyline 2000 Series Operator Workstation Hardware Manual Chapter 6 - Greyline Communication Ports
••••
23
PLC Cables
To connect PLCs to the Greyline Operator Workstation, PLC cables are required. Since different cables
are required for different PLC models, it is recommended that you contact Total Control Customer Service
department for specific cable information.
Port X
Port X is a serial expansion port, and may be connected to a S
ERIES
T
WO
device, a serial printer, a host
computer, or a PLC.
This port is configured as a DCE (Data Communication Equipment) port.
Pinout - Port X
The pinout for Port X is illustrated below.
Programming Cable
A programming cable CBL-154 (9 pin or AT) is necessary when downloading to the Greyline. Connect
the programming cable to Port X and your personal computer, and disconnect when programming is
completed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com