Total Control Greyline 2000 Series, Руководство по оборудованию

Страница: 19 / 37

14
••••
Chapter 4 - Switch Settings Greyline 2000 Series Operator Workstation Hardware Manual
Baud Rate 1, Baud Rate 2, and Baud Rate 4 constitute Dip Switch switches 1, 2, and 3 respectively. If in
Program mode, adjust the switches as indicated by the gray area shown below, to select the appropriate
baud rate:
BD RT 1 BD RT 2 BD RT 4 Baud Rate
0 0 0 Test Mode
1 0 0 300 baud
0 1 0 600 baud
1 1 0 1200 baud
0 0 1 2400 baud
1 0 1 4800 baud
0 1 1 9600 baud
1 1 1 19200 baud
A "0" in the above chart represents a switch which is off
or open. A "1" in the chart represents a switch
which is on or closed.
4
5 7 8
1
O FF
O N
Note:
Set switches then cycle power. Switches are only read during power up.
Multiple Function Keys
Switch 5 on the Dip Switch. When this switch is activated, the Greyline is capable of recognizing multiple
function keys.
Display Placeholder
Switch 6 on the Dip Switch. When this switch is activated, variable data placeholders appear as
underscore characters on the Greyline display. When not activated, variable data placeholders appear as
space characters on the Greyline display. Refer to your Greyline Universal Software Manual for further
information.
Auto Repeat
Switch 7 on the Dip Switch. When this switch is activated, the function keys will automatically repeat
when pressed and held down.
Repeat All
Switch 8 on the Dip Switch. When this switch is activated, both the function keys and numeric function
keys will automatically repeat when pressed and held down.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com