Total Control Greyline 2000 Series, Руководство по оборудованию

Страница: 17 / 37

12
••••
Chapter 3 - Introduction: Main Features Greyline 2000 Series Operator Workstation Hardware Manual
run the program following completion of programming, and/or bypass directly to the PLC for
programming purposes. Refer to the Greyline Universal Software Manual for further information.
Note:
Before Bypass mode can be selected, the user must first download a TSP or
Greyline Universal Software configuration matching the communication
parameters of Port B and the PLC model.
LCD Adjust
The LCD Contrast Adjust is located at the center of the underside (interior) of the rear panel. A blue-
colored knob, this LCD Adjust is used to change the contrast of the display of the Greyline Operator
Workstation. Refer to paragraph 4.3 for instructions. This adjustment is only available on Backlit
Supertwist LCD models (20xx Series).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com