Total Control Greyline 2000 Series, Руководство по оборудованию

Страница: 18 / 37

Greyline 2000 Series Operator Workstation Hardware Manual Chapter 4 - Switch Settings
••••
13
Chapter 4 - Switch Settings
Dip Switch
Default settings for dip switches 1 through 8 are shown below.
Switch No. Function Position
1 Baud Rate 1 OFF
2 Baud Rate 2 ON
3 Baud Rate 4 ON
4 Spare OFF
5 Multiple Function Keys OFF
6 Displacement Placeholder ON
7 Auto Repeat ON
8 Repeat All ON
Baud Rate
The baud rate for the Greyline Operator Workstation is switch selectable if in Program mode, and software
selectable if in Run and Bypass mode. Refer to the Greyline Universal Software Manual for a more
complete explanation for baud rates that are software selectable (Run and Bypass mode).
In Program mode, the baud rate is switch selectable, meaning that the baud rate is determined by the
position of the Dip Switch. Although the baud rate choices are 300, 600, 1200, 2400, 4800, 9600, and
19200, at this time, the software
only supports 9600 . Therefore, after switches 1, 2, and 3 are initially set
for 9600 baud, there is no need to make future adjustments.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com