Total Control Greyline 2000 Series, Руководство по оборудованию

Страница: 13 / 37

8
••••
Chapter 3 - Introduction: Main Features Greyline 2000 Series Operator Workstation Hardware Manual
Function Keys
Function keys F1 through F8 are located below the numeric keypad. These function keys are user
definable. Refer to your Greyline Universal Software Manual for further information.
F1 F2 F3 F6 F4 F5 F7 F8
Note:
The Greyline Operator Workstation features a "beep" which provides audible
feedback to the user. One beep signals a positive acknowledgement and two
beeps signal a negative acknowledgement.
LEDs
LEDs, located on the left side of the front panel, are user definable and typically reflect the status of a bit
in the PLC. The LEDs are independent of the function keys. Refer to the Greyline Universal Software
Manual for further information.
LD 2
LD 6
LD 7
LD 8
LD 5
LD 3
LD 4
LD 1
Replaceable Legends
Replaceable legends (blank slip-in legend sheets) are provided for function keys, LEDs, and the numeric
function keys. These legend sheets are made of durable plastic and are comprised of two separate strips --
one for the LEDs, function keys F1 through F7, and another for the numeric function keys and function
key F8. The removable legends are located beneath the surface of the Greyline front panel. The following
section describes how to remove and replace the legend strips.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com