HARDWARE CONTENTS (shown actual size)
y
AA
Wing nut
Qty. 3
BB
Small flat
washer Φ6
Qt . 6
DD
3/16” Screw
Qty. 42
KK
Philips
screwdriver
Qty. 1
EE
Bolt M6 X 12
Qty. 4
y
JJ
Wrench
Qt . 1
Fixing Bracket
Qty. 4
HH
CC
Stud
Qty. 3
FF
M6
Flange
nut
Qty. 4
GG
Screw
M5 X 12
Qty. 6
LL
Knob
Qty. 1
MM
Screw
M4 X 10
Qty.1
NN
Chain
Qty.1
OO
Long Stem Lighter
Qty.1
ASSEMBLY PARTS - 2
Assembly Instructions
For Best Results:
First please prepare for tools needed such as:
Rubber Hammer Wrench Phillips-head Screwdriver Flat-head Screwdriver
Then remove all contents from packaging, and make sure all parts are present before
attempting to assemble! Tighten all bolt connections by hand first, then when the flame
heater is fully assembled, go back and tighten.
Before Assembly:
Please read all instructions thoroughly before proceeding. Find a large, clean area in
which to assemble your flame heater. Please refer to the parts list and assembly diagrams
as necessary.
Assembly of the flame heater involves many large components, it is advisable to have
two people assemble the unit.
Whilst every effort has been made in the manufactur e of your barbecue to remove
any sharp edge, you should handle all components wi th care to avoid accidental
injury.
Tools required: Either a Philips crosshead or flat-bladed screwdriver and either an
adjustable spanner or a pair of pliers.
3
