3.2
Advanced Set.
Boat Option
Boat Option
CH Reverse
Channel Limit
Dev. Mode
Advanced Set.
X-Boat
1 Engine
2 Engines
Boat Option
CH Reverse
Channel Limit
Dev. Mode
Advanced Set.
CH1 Reverse
CH2 Reverse
Used to limit the Max speed which your boat can get when it work with X-Pilot.
Channel Limit
Used to enter developing mode for engineer testing.
Dev. Mode
X-Pilot can work with most kinds of bait boats( with 2 engines or 1engine & rudder) . So, before
you start the operation, please select the corresponding boat type.
Mode Setting...
NOTE: after you changed and confirmed a new boat option, a
message-box will appear:
X-Boat:
specially for Toslon X-Boat
.
1 Engine:
for the boat designed with 1 engine (and rudder).
2 Engines:
for the boat designed with 2 engines.
CH Reverse
During you made
[wiring test]
,
[CH Reverse]
is used to correct the
running direction of motor (or rudder) after you found them did not
run the correct direction as expected.
For example, if your boat are with 2 engines, and you found the motor
was running the counter direction when you push
[Go Forwarder]
in
the
[wiring test]
, then please enter into
[CH Reverse]
and select
CH2 Reverse.
CH1 Reverse:
to correct the running direction of rudder
.
CH2 Reverse:
to correct the running direction of motor.
