3.3
Menu List
Waypoints
List of stored waypoints
X-Pilot Setting
Wiring Test
Steering sens.
Compass Cali
Compass Test
Beeper
Backlight
Contrast
Time Zone
Language
Load Default
Boat Option
CH Reverse
Channel Limit
Dev. Mode
Test if the X-Pilot could control the boat properly
Set the sensitivity of boat steering
Used for calibration of compass
Used to check if compass working normal or not
Set if the unit sound a tone or not when a key is pressed
Allow the unit to be used at night
To get a suitable display when operate the unit
Selects time zone for using in different countries
Select the display language for menus
Used to restore original factory setting
Select boat type to match X-Pilot setting
To correct the running direction of motor (or rudder)
Limite the max speed of boat (with X-Pilot built in)
Developing Mode for engineer test
System Setting
Advanced Set.
Set different RF channel to allow more than one users
operating the device in the same region without any
radio interference
RF Channel
System Info.
Show system information of device
Sounds when the input battery voltage of transmitter is
equal to or less than the setting
Set if the display sounds with warning message when
the input battery voltage of display is low enough
Boat Voltage
Dsp. Voltage
