Toshiba TLP-WX200, Руководство пользователя

Страница: 15 / 53

8 9
Operations
Basic operations
1
Turn on the power.
Turn on the power by following the instructions in “ Turn the power on ”
p.26
.
2
Select the language and the lamp power during initial
startup.
When the projector is used for the first time after purchase, the start menu for
language selection, lamp power selection and configuration is displayed in English. (If
the screen is out of focus, adjust it according to the step
6
.)
1
Use the , ,
or
button to select the desired language and
then press the button.
English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish Polish
Norwegian
Finnish
Czech
Hungarian
Greek
Danish
Dutch
Rumanian Japanese
Chinese (simplified)
Chinese (traditional)
Korean
Indonesian
Thai
Arabic
The message for setup confirmation is displayed in the selected language.
Then, the menu for lamp power selection and configuration is displayed. It is
automatically set as Standard. To change the setting, follow the step
.
Use the or button to select the lamp power and press the
button.
The lamp power, if selected, will be toggled without pressing the button. The display
automatically disappears in a few seconds.
Notes
When the projector is turned on the next time, the start menu will not appear upon
startup. However, if [
Reset all ] is executed from the Default setting 2 menu
p.43
,
the start menu will be displayed the next time the power is turned on.
The language can also be set via the
Display setting menu
p.39
and Lamp power
via the Default setting 1 menu
p.42
.
This owner’s manual assumes that English has been selected.
3
Activate the connected device.
Turn on and start the connected device such as a computer.
4
Press the INPUT button.
An image of the connected equipment is projected.
Each time you press the
INPUT button, it switches to the input of the connected
equipment that is outputting video signals.
•
•
•
Notes
When [
Auto input search
] is set to [
Off
] in the
Default setting 1
menu
p.42
,
the Input select menu appears if you press the INPUT button. The factory default
setting is [ On ].
If no signal is being output from the connected equipment, pressing the INPUT button
does not change the input and “
There is no other input signal.
” message will appear.
5
Adjust projector placement angle.
You can adjust the placement angle and the height of the projected image using the
foot adjuster.
1
Lift up the front of the projector to
the desired angle, then press the
foot adjuster release button upward.
The foot adjuster extends. Release the
button to lock the position.
To fine adjust the angle, twist the
foot adjuster.
To stow the foot adjuster, hold up the
projector while pressing the foot adjuster
release button, then slowly lower the
projector.
Note
When [ Auto keystone ] is set to [ On ] in the Default setting 1 menu, the keystone
distortion will automatically be corrected based on the projector placement angle. If
you do not desire the automatic keystone correction, set [
Auto keystone ] to [ Off ].
6
Adjust the screen size and focus.
1
Use the zooming lever to adjust the screen size.
Use the focusing lever to adjust the focus.
7
Adjust the volume with the buttons.
The speaker volume can be adjusted when an audio signal is
being input.
•
•
•
•
Front