Service Mode
How to sift to the Service mode
While the Audio level adjustment bar or the Camera gain adjustment bar is displayed on the screen, press
the buttons, [INPUT], [ON/STANDBY], [AOUT KEYSTONE] and [AUTO SET] simultaneously.
Then, the projector shifts to the Service mode.
The Service mode will be maintained until you pull the AC plug out.
How to display the Operation state
After the projector shifted to the Service mode, press [AUTO KEYSTONE] button and [VOL.+] button at
once.
Then, the Operation state appears on the screen.
When you press [MENU] button, it will disappear.
C10
TLP-T71M
1000-1000
L=
10: 30: 50
P=
10: 30: 50
T=
10: 30: 50
Sub-B =
109, 114, 124
Sub-C =
100, 110, 99
KC0 =
T:39 P:10261 H:5055
KC1 =
T:40 P:10264 H:5944
KC2 =
T:41 P:10263 H:4160
KC3 =
T:44 P:10306 H:5084
Err =
9
Shutdown =
7
List =
13, 1, 1, 2, 1, 1, ,13, 13, 10, 0
the latest error
the older error
Past ten times
Transmission speed
Firmware version of the camera unit
( the model with a camera only)
The adjustment values
of input signal level
that you are using.
Model name
Firmware version
of the projector
Timer indicator
L: Lamp timer
P: Panel timer
T: Total timer
The values of
setting keystone
correction
Times of error (0-255)
Times of shutdown
on the power-on
state
Service mode
9600bps
