4
(2) Select [SUB] from starting menu and click
[Execute].
(Note)
After above the step, the message box according to
each model appears.
Make sure that the specified signal is supplied, click
[OK] button.
The connection change of the unit is not required.
(Eg.: In case of TLP-T71)
(3) Input all-black signal to the XGA (1024 x 768)
and click [OK] button.
(The unit will be automatically switched to
Computer input.)
* Screen resolution selection is executed on the
Display Properties.
(4) Input all-white signal to the XGA and click [OK]
button.
3. Input signal level adjustment
(Perform the adjustment when main
PC board is replaced)
This procedure corrects variation of input signal level
by each main PC board and adjusts to stabilize.
The input signal level is adjusted automatically with
specified signal inputting.
(1) Start the signal generating software (SINGO98.exe)
and input all-white signal.
Then, right-click to display the following color
pallets. Switch to white or black according to the
adjustment.
