3
2-2. Adjustment of high temperature
(1) Perform heat-run for 30 minutes or more.
Select [KEYSTONE] from starting menu of
adjustment software.
Check 0 (High temperature) and click [Start].
(2) Place the projector on a level surface and make
sure it is warm enough.
Click [OK] button.
(3) Click [OK] button.
(4) After the adjustment, click [Close] to exit.
(Note)
Only for the keystone correction initialization of
high and low temperatures at one time, check
both [0,+30,-30] and [0(High temperature)] check
boxes on the menu and click [start]. In this case,
perform enough heat-run before starting the
initializing of 0 (High temperature).
