Toshiba STRATA CIX, Руководство по программированию

Страница: 84 / 248

Voice Mail Configuration
Parameters
3-44
Strata CIX Voice Mail Programming 01/07
sys_tape_length When a User selects option 1 (Play Messages), and then 78 (Continuous
Play) or 76 (Continuous Delete), this parameter specifies the number of
minutes to play or delete. Usually it is the length of one side of a tape that
might be used for recording a set of messages in a mailbox.
Possible values: 0~99
Default: 30
Note Setting the value to 0 disables both Continuous Play and Continuous
Delete.
sys_timestamp_forward Controls the date/time stamp the system uses on a forwarded message.
Possible values:
True: (default) Use the date/time that the message was forwarded.
False: Use the original date and time the message was first recorded.
sys_tmo_answer_prompt Delay in milliseconds to answer a call after line goes off-hook for SMDI.
Possible values: number in milliseconds
Default: 500 (ms)
sys_tmo_auto_record Specifies the length of pause time (in ms) during Auto Recording. If the Auto
Recording is paused longer than this, the recording is terminated.
Default: 60000 (ms)
sys_tmo_dir_interdigit Specifies the timeout in milliseconds that Stratagy waits between two
consecutive digits during Directory lookups.
Possible values: number of milliseconds
Default: 5000ms
sys_tmo_dtmf
Amount of time in milliseconds voice mail waits to determine that the caller
has finished entering DTMF digits (provided the caller does not press
#
).
Possible values: number in milliseconds
Default: 1200 (ms)
sys_tmo_dtmf_login Amount of time in milliseconds voice mail waits to determine that the caller
has finished entering DTMF digits (provided that the caller does not press
# )
when entering the mailbox number and security code during the log in
process.
Possible values: number in milliseconds
Default: 2000 (ms)
sys_tmo_dtmf_start_timeout
Specifies the timeout in milliseconds that voice mail waits before receiving
the first digit.
Possible values: number in milliseconds
Default: 4000 (ms)
Table 3-12 Parameter Definitions (continued)
Parameter Description