Toshiba Stata Dk16, Руководство пользователя

Страница: 6 / 26

To Receive an Intercom Call:
1. You will hear ringing.
2. Lift the handset and speak.
To Set Automatic Callback
(Voice First Signaling):
1. After reaching a busy station,
dial
4
.
2. Hang up.
3. Your telephone will ring at a
fast rate when the called
station becomes idle.
can change the signaling mode by pressing 1 after dialing the digital
or electronic station number. See Tone/Voice First Signaling later in
this guide.)
■
If you are calling another standard telephone, you will hear repetitive
ringing. Wait for the called station user to answer.
■
To leave a Message Waiting Indication at the called station, dial 7.
If you receive busy tone:
■
To set Automatic Call Back (ACB), dial 4.
■
To activate Busy Override if the called digital or electronic telephone
station is not equipped for Off-hook Call Announce (OCA), dial 2.
(Standard telephones cannot be equipped to receive OCA.)
■
To activate OCA at digital or electronic telephones: With Voice First
Signaling and if the called station is equipped for OCA, dial 2. With
Tone Signaling and the called station is equipped for OCA, dial 21.
■
To leave a Message Waiting Indication at the called station, dial 7.
■
Hang up and try again later.
The intercom ring pattern is one second ringing, three seconds silence.
You will be connected to the calling party.
AUTOMATIC CALLBACK
After reaching a busy station or a telephone in the Do Not Disturb (DND)
mode, you may set Automatic Callback to have the system call you back
when the called station is no longer busy or in the DND mode. Automatic
Callback does not apply to outside calls.
The busy tone will stop. You will hear dial tone for two seconds, then the
busy tone will resume.
You may make other calls while waiting for the called station to become
available.
STRATA DK STANDARD TELEPHONE FEATURE OPERATION
1-2