Toshiba Stata Dk16, Руководство пользователя

Страница: 22 / 26

To Make an Outgoing Call with
DISA:
1. From outside the system, call
a DISA CO line telephone
number:____-____________.
2. Listen for repetitive ringback
tone, then listen for intercom
dial tone.
3. Dial a CO line number or line
group access code.
4. If a DISA security code is
required, dial the code and
listen for CO dial tone.
. . . or . . .
If a DISA security code is not
required, you will hear CO dial
tone.
5. Dial a telephone number.
station call, the internal party must transfer you. Station and System
Page cannot be accessed on DISA calls.
See the system administrator for this number.
Try again if you hear busy tone.
Dial tone will be present for 10 seconds to allow direct dialing of a station
intercom number or CO line access code. If a number is not dialed, the
system automatically causes the DISA CO line to ring at telephones as a
normal incoming call. Then, if the call is not answered within 15 seconds
after the ringing starts it will disconnect.
CO line number access codes are 7 0 1 ~ 7 0 4 (for DK8) and 7 0 1 ~
7 0 8 (for DK16), and line group access codes are 8 1 ~ 8 4 (for DK8)
and 8 1 ~ 8 8 (for DK16). The Least Cost Routing code (9) is not allowed.
If required, see the system administrator for this number. If the entered
code is not correct, the call will be disconnected.
A timer tone that is audible to both parties will sound approximately four
minutes after the call was made. Dial 0 to reset the timer each time the
tone sounds for an additional four minutes. If you fail to dial 0, the call will
disconnect approximately one minute after the tone.
TOLL RESTRICTION OVERRIDE/TRAVELING
CLASS
You can completely override Toll Restriction at a station or change the
station's Toll Restriction class to another level. The station will resume its
normal class at the conclusion of the call. Use the following procedure to
completely override or to change a station's Toll Restriction class.
STRATA DK STANDARD TELEPHONE FEATURE OPERATION
1-18