Toshiba Stata Dk16, Руководство пользователя

Страница: 11 / 26

The new party must pick up the handset or press their intercom button to
participate in a Conference call.
All parties will be conferenced.
If the called station was busy, you could flash the hookswitch to return to
the existing call, or you could hang up and receive immediate recall
ringing to answer the existing call.
“Flash the hookswitch” by depressing the hookswitch (plunger) located in
the handset cradle for about 1/2 second. (Some telephones may have a
special button which flashes the hookswitch when pressed.)
You will hear intercom dial tone, and the existing call will be placed on
hold. You will not hear the held party again until Step 4.
CO line number access codes are 7 0 1 ~ 7 0 4 (for DK8) and 7 0 1 ~
7 0 8 (for DK16). With some systems, you may have to dial either the
general group code (9), Least Cost Routing code (9), or a Line Group
code (8 1 ~ 8 4 for DK8; 8 1 ~ 8 8 for DK16), instead of a CO line number
access code.
If the party is busy or does not answer, hang up to receive an immediate
recall to return to the existing call.
All parties will be conferenced.
Two CO lines maximum can be conferenced. Depending on
circumstances, the outside parties may experience difficulty hearing each
other.
2. Dial the number of the station
you want to add to the call.
3. If you hear a single tone,
voice announce the call and
ask the party to pick up.
4. Flash the hookswitch when
the party answers.
5. Repeat Steps 1 ~ 4 to add
another station to the
conference.
To Conference By Adding a CO
Line to a Call:
1. While on a CO line or
intercom call, flash the
hookswitch.
2. Dial a CO line number access
code.
3. Dial the desired telephone
number you wish to add to the
call.
4. Flash the hookswitch when
the party answers.
5. Repeat Steps 1 ~ 4 to add
another CO line to the
conference.
STRATA DK STANDARD TELEPHONE FEATURE OPERATION
1-7