13
You can also enjoy high quality dynamic sounds of an optional equipment by connecting with this unit.
• The OPTICAL IN and COAXIAL IN sockets are belong to LINE IN 1 input.
If you connect the DVD player using a Optical lead or Coaxial lead, the Video lead must be connected to LINE
IN1 VIDEO INPUT socket.
• If you connect your VCR or DVD player to LINE IN 1 sockets, you must set “LINE 1 select” setting to the
appropriate position. (See page 22.)
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from
the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
To
AUDIO/VIDEO INPUT
To
Optical
output
To OPTICAL IN
OPTICAL lead (not supplied)
COAXIAL lead (not supplied)
To COAXIAL IN
To
Coaxial
output
DVD Player
VCR
To Audio/Video outputs
To
Audio/Video
outputs
Audio/Video lead
(not supplied)
To AUDIO/
VIDEO
INPUT
Audio/Video lead (supplied)
Signal flow
Connecting to optional equipment
FM/AM aerial connections
Connect the supplied FM/AM aerials for listening to the radio.
• Connector the FM wire aerial to the FM-IN ANTENNA socket.
• Connect the AM loop aerial to the AM-IN ANTENNA terminals.
AM loop aerial (supplied)
FM aerial (supplied)
Notes:
• To prevent noise pickup, keep the AM loop aerial away from the unit and other component.
• Be sure to fully extend the FM wire aerial.
• After connecting the FM wire aerial, keep it as horizontal as possible.
2D20401A P08-15
26/9/03, 6:01 PM
13
