37
Press or – to select the desired
position number.
You can also select the desired position num-
ber using the number buttons (0–9), then press
ENTER.
• For example, to select the preset position
number 7, press 0 and 7, then press ENTER.
To select the preset position number 25, press
2 and 5, then press ENTER.
Preset the radio stations first as described on page 36.
Press DVD/FM/AM to select FM or AM.
Listening to the radio
1
2
Reception of RDS (Radio Data
System) stations
RDS (Radio Data System) is a system gradually being
introduced on FM in many countries, where by an inau-
dible stream of data is transmitted in addition to the nor-
mal radio signal. This data contains various information
including station/transmitter identification, traffic informa-
tion and a list of alternative frequencies for the radio sta-
tion being received.
Notes:
• RDS is only available for FM reception.
• The PS (PROGRAM SERVICE) NAME is displayed auto-
matically when a RDS station is received.
Press DVD/FM/AM select FM.
1
2
Select a desired station by pressing the PRE-
SET + or –. When the RDS transmission is re-
ceived, the RDS indicator and the programme
service name (PS) appear on the display win-
dow.
Adjust the volume by rotating Volume knob on
the front panel or VOL +/– on the remote con-
trol.
3
2D20401A P32-BACK
26/9/03, 6:03 PM
37
