Toshiba SD-25VLSR страница 9 Скачать руководство пользователя

Страница: 9 / 140

VCR

8+4

VCR

Counter Display

CH 2

12:00 SUN

00:04:38 SP

B/G

CH 2

12:00 SUN

00:00:00 SP

B/G

ZERO RETURN function

This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.

Notes:
• When you load a video cassette, the

display indication changes to "00:00".

• The counter display does not function

on non-recorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter display stops.

Preparation

• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)

Press DISPLAY.
The counter display shows the
tape running time during playback
or recording.
The Recorder will indicate REC
during recording for itself.

Press COUNTER RESET at
the desired tape position. The
counter display will be reset to
the “00:00:00” position (e.g.
the beginning of recording).

Press STOP when playback or
recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast
forwarded and automatically
stop at the “00:00:00” position.

The CLOCK/COUNTER-button

Press CLOCK/COUNTER during the playback. The clock and tape
counter alternate with each other in the display.

Note:
You can set the tape counter to 00:00:00 with COUNTER RESET
anytime. Therefore, the counter display can also indicate 00:00:00,
even when the tape counter does not reach its beginning yet. Even
if the tape counter indicates 00:00:00, it can be rewinded moreover.
If the tape was rewinded over the point of 00:00:00, the minus mark
(–) appears in the counter display. Although the tape counter seems
to forward when you press REW, in fact the tape is being rewinded.
When the tape reaches the beginning, the tape-rewinding stops
automatically.

CH 2

12:00 SUN

00:36:25 SP

B/G

ENGLISH

CH 2

INDEX

REC

VCR

REC

VCR

INDEX NO. (up to 9)

or is displayed

Whenever  a  recording  is  begun  an
invisible  index  mark  is  recorded  on
the  tape.  These  index  marks  are  all
identical, and each mark means: "Here
starts a new recording". Every DVD/
VCR  equipped  with  the  Video  Index
Search  System  (VISS)  can  locate
these marks at the beginning of any
recording.

Notes:
• When you record an INDEX mark at

the very beginning of the tape, the mark
may not be found.

• During INDEX search, the tape may

stop and begin to play at a slightly
different location.

• INDEX may not function properly with

old or worn out video tapes.

• INDEX marks may not be found if it is

extremely close to the point where the
search began.

• In recording, if you stop recording tem-

porarily, the INDEX mark is not re-
corded on the tape.

Start playback and wait until the
end of the TV commercial is
reached, then press STOP.

Press REC/OTR once. When the “INDEX” on-screen indication
goes off, STOP may be pressed. This short recording process
will be sufficient to set an index mark.
This will result in about 10 seconds of the TV commercials to be
overwritten by another recording. Due to the system the end of
this recording will be followed by a recording gap (noise signal)
of approx. 5 seconds.

Recording several Index Marks
Due to the system only one index mark will be recorded at the
beginning of a recording. If you intend to set several index marks
during a single recording, follow the procedure below:

Video Index Search System

Example: Indexing of TV commercials.

At the point of the recording
where an index mark is to be set
press PAUSE/STILL. The unit
will switch to the recording pause
mode.

Press CH +/– repeatedly to
switch back to the original TV
program.
Press PAUSE/STILL to
resume recording.

Index Search

Press INDEX + or – during stop or
play mode.
For Succeeding programs:
Press INDEX +.
For Preceding programs:
Press INDEX –.
(Additional press increases the IN-
DEX NO. up to 9.)
When the INDEX + or – is pressed,
the unit starts searching the INDEX
NO. selected and finds the portion,
then playback starts automatically.
To stop the Index Search, press
STOP.

REC

VCR

REC

VCR

Recording a TV Program

CH 29

INDEX

VCR

Notes:
• Since the DVD/VCR has a built-in TV

tuner the TV set may be turned off when
recording. The TV set may only be used
to check for accurate program adjust-
ments or to monitor recordings.

• If you wish to watch the DVD playback

during the recording on VCR, press
DVD to change to DVD mode and per-
form the DVD playback (see page 40).

Preparation
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will

light.)

Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will auto-
matically turn on.)

Select the program(e.g.29) you want to record with CH +/– or 10
number buttons.
1~9 : e.g. 5 = press “5”
10~80 : e.g. 29 = press “2” and “9”.

If a recording in Long Play mode is
intended, press SP/LP to display
“LP”.

Press REC/OTR to start recording.

If the erase prevention tab is removed, the tape will eject when REC/
OTR is pressed for recording.(see p.24)

To Stop Recording

Press STOP.

To Stop Recording Temporarily

To  stop  a  recording  for  a  short
period  of  time  press  PAUSE/
STILL.  Press  this  button  again  if
you want to resume the recording.

Attention:

A safety circuit turns the pause mode off automatically after 5
minutes, and the DVD/VCR will stop the recording mode.

00:00:00 LP

ENGLISH

VCR

Recording a TV Program

“VCR” indicator goes on.

“VCR” indicator goes off.

“VCR” indicator goes on.

Recording with a SCART Cable:
You can record a program using the TV
receiver of the DVD/VCR and at the same
time watch another program on the TV set
using its receiver. As the DVD/VCR auto-
matically switches the TV set the following
points should be observed:

Auto Rewind Feature
The DVD/VCR will automatically rewind when
the tape has ended (except during OTR and
TIMER REC). It will also eject the cassette
tape.

Press TV/VCR until “VCR” appears on the display. Select the program
on the DVD/VCR you want to record. This program can be watched on
the screen and recorded by the DVD/VCR.

While the VCR is recording press TV/VCR until the “VCR” indicator on the
display goes off. The TV set now displays the program of its built-in
receiving module. Select the TV channel you want to watch on the TV set.
Although the TV set now shows another program the DVD/VCR will
continue recording the previously selected program.

Using TV/VCR you can switch the TV screen between the DVD/VCR
picture and the TV picture. If the “VCR” indicator is lit on the display, you
will watch the DVD/VCR picture. This has no trouble on the recording.

To Display VCR operation Status

Press DISPLAY. The clock, day of the week and more informations will be
indicated.

To cancel the indicating: Press DISPLAY until all indicator disappear.

REC

4-+

8+4

To find unrecorded (blank) areas on a tape

The DVD/VCR searches for blank sections of tape in the direction of fast-
forwarding and automatically stops the tape when one is found.

Press BLANK SEARCH. The tape automatically stops at a blank section
of tape.

<Example when a blank section of tape is successfully located>

When the DVD/VCR searches for blank sections on an overwritten tape, it
stops at the end of the newly recorded section. To locate a blank section,
play the tape first to check the content and then press BLANK SEARCH
again.

Recorded

Unrecorded (blank)

Current location on the tape

Fast forward

New recording

(overwriting)

Recorded earlier

Unrecorded (blank)

Current location on the tape

Fast forward

CH 80

23:59 MON