background image

5

INSTALLING YOUR TV

En
glish

Installation and important information

Locate the television away from direct sunlight and strong 
lights, soft, indirect lighting is recommended for 
comfortable viewing. Use curtains or blinds to prevent 
direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the 
weight of the TV. 

In order to maintain stability and 

prevent it falling over, secure the TV to the level 
surface using the strap located under the table top 
stand, or to a wall using a sturdy tie to the clip on the 
back of the table top stand

.

The LCD display panels are manufactured using an 
extremely high level of precision technology; however, 
sometimes some parts of the screen may be missing 
picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break 
or damage the screen. Also please be certain that small items cannot be inserted into slots or openings in the case.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you 

do not

 use 

any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

The digital reception function of this television is only effective in the countries listed in the “Country” section of 
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception 
of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, 
video games, on screen menus, etc. are left on the television screen for any length of time, they could become 
conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of 
other size modes (eg: Super Live) will prevent permanent retention.

Where to install

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)

fire;

ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s 

manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with 

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited 
to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or 
misuse of the product.

NOTE: 

A Toshiba wall bracket or stand, where available, must be used to maintain the product's BEAB approval.

Stand clip

‘P’ Clip

Sturdy tie (as short as possible)

Fixing strap

Stand style is dependent on model

Fixing strap

RVXVMV73_WebOM_UK.book  Page 5  Monday, April 19, 2010  10:46 AM

Содержание RV73* Digital Series










































































Отзывы: