16
SETTING UP YOUR TV
En
g
li
sh
NOTE:
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning
will completely re-tune the television and can be
used to update the channel list.
It is recommended that Auto
Tuning is run periodically to ensure that all new services
are added
. All current channels and settings, i.e. locked
channels, will be lost.
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
Use
b
to highlight
Auto Tuning
. Press
Q
.
b
A screen will appear warning that previous
programmes and settings will be deleted.
Use
C
or
c
to select
DTV and ATV
,
DTV
or
ATV
, if
available, then highlight
Start Scan
and press
Q
to
continue with the
Auto Tuning
.
NOTE:
If you have selected "
Others
" for the
Country
field in the
SETUP
menu, and selected a tuning mode
other than "
DTV
" , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the
Auto Tuning
screen
will display the services found.
c
Use
b
or
B
to move through the list to select a
channel, and then press
Q
to view.
ATV Manual Tuning
The television can be tuned-in manually using
ATV Manual
Tuning
. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another
System
.
Use
C
and
c
t
o move across the screen and select any of the
ATV Manual Tuning options
.
Then use
B
or
b
to adjust the
settings
.
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
Set Skip to On (
8
) or Off (
(
) for the selected channel.
See page 18
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 65.
9
Station
Station identification. Use the
B
or
b
and
C
or
c
buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
Auto Tuning
SETUP
Menu Language
English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
UK
Antenna
Quick Setup
Auto Tuning
DTV and ATV
Tuning Mode
Start Scan
Previous settings will be lost!
Press EXIT for no change.
Tuning
ATV Manual Tuning
System
1 A C 2 0
V C R
I
1 2 3 4
6
5
7 8
9
RVXVMV73_WebOM_UK.book Page 16 Monday, April 19, 2010 10:46 AM
