Toshiba RAV-SM182UTP-UL, Руководство по установке

Страница: 20 / 31


Swing type

Louver lock
* Select the louver swing type from the standard swing,
dual swing or cyclic swing.
Carry out the setting operation while the indoor unit
is stopped. (Turn off the air conditioning unit before
starting the setting operation.)
* The direction of the louver can be locked individually.
Carry out the setting operation while the indoor unit
is stopped. (Turn off the air conditioning unit before
starting the setting operation.)
Before setting
Before setting
1
Push the [ ˄ ] / [ ˅ ] button to select
“3.Louver setting” on the menu screen, then
push the “ Set” [ F2] button.
2
Push the [ ˄ ] / [ ˅ ] button to select
“1.Swing type”, then push the
“ Set” [ F2] button.
3
Push the [ ˄ ] / [ ˅ ] button on the
“Swing type” screen to select the swing type.

Refer to the Owner’s Manual supplied with the
indoor unit about the swing type.
4
Push the [ MENU] button.

“ Setting” appears on the display.

The unit selection screen appears when the
group control is used. Push the [ CANCEL]
button on the unit selection screen to finish the
setting operation. “ Setting” appears on the
display.
1
Push the [ ˄ ] / [ ˅ ] button to select
“3.Louver setting” on the menu screen, then
push the “ Set” [ F2] button.
2
Push the [ ˄ ] / [ ˅ ] button to select
“2.Louver lock”, then push the
“ Set” [ F2] button.
3
Push the “ Louver No.” [ F1]
button to select the louver to set.

The display changes as follows each time the
button is pushed.
• “No function” appears on the display for the models
not equipped with the Swing type setting.
• Push the [ CANCEL] button to stop the setting
procedure. No setting has been made and the
screen returns to “Louver setting”.
NOTE
Electrical control
box
Refrigerant pipe
Drain pipe
4
Push the [ ˄ ] / [ ˅ ] button to select
the louver (wind) direction.

Push the [ ˄ ] button to move the louver
upward. Push the [ ˅ ] button to move it
downward.
5
Push the [ MENU] button.

“ Setting” appears on the display.

The unit selection screen appears when the
group control is used. Push the [ CANCEL]
button on the unit selection screen to finish the
setting operation. “ Setting” appears on the
display.
• “No function” appears on the display for the models
not equipped with the Louver lock setting.
• Push the [ CANCEL] button to stop the setting
procedure. No setting has been made and the
screen returns to “Louver setting”.
• “ ” appears on the display when the Louver lock
function is used.
• Push the [ ˄ ] / [ ˅ ] button repeatedly to
select the “Not locked” setting as the louver direction
to release the lock.
• Condensation may occur if the louver is locked in the
position (4) or (5) while cooling.
NOTE
� 19 �
37-EN 38-EN
1
3
2 4
1.Swing type
2.Louver lock
1115350171_EN,FR,ES.indd 20 19/3/2565 9:38:18