Toshiba RAV-GM 1101UT-E, Руководство по обслуживанию

Страница: 82 / 125

– 82 –
9-2. Outdoor Unit
Various status displays and operations can be accessed using the push buttons (service switches) on the
outdoor Control P.C. board and LED display.
Service switch (SW01 and SW02) operation
Concerning the LED display
• The LED display has 4 patterns.
: Go ON : Go OFF : flash (5 times/sec) : flashing (1 time/sec)
• The initial state of the LED display is as shown on the
right with D805 lit up.
If not in the initial state (D805 flashing) then it can be
returned to the initial state by pushing and holding down
SW01 and SW02 at the same time for 5 seconds.
D800 to D804 : Go Off and fla s h (5 time s / s ec)
D805 : Go ON
D800
D801
D802
D80 3
D804
D805
(Yellow)
LED
(Yellow) (Yellow) (Yellow) (Yellow) (Green)
LED display: Initial state
SW02
SW01
LED
(D800 to D805)
<GP110, GP140>
<GP80>
SW02
SW01
LED
(D800 to D805)