Toshiba RAV-GM 1101UT-E, Руководство по обслуживанию

Страница: 118 / 125

– 118 –
No. Part name Procedure Remarks
j
PMV coil 1. Detachment
1) Following to work of Detachment of
f
.
2) Cut the binding band (2 positions) on the back surface
3)Pull the connector for PMV coil out of control P.C.
board.
(Remove the clamp filter installed to near the
connector to attach it to the coil lead replaced.)
4) Remove the coil from the PMV body by rotating the coil
(about 45°) while drawing the coil upward.
2. Attachment
Attach the PMV coil in the reverse process of
“ 1. Detachment ”
1) Fix the coil positioning protrusions securely in the
concavities of the PMV body.
(Fix the coil in the direction where lead wire comes out
at the body’s left diagonally behind.)
2) Attach the connector on the PMV coil to the control
P.C. board.
(Attach the clamp filter installed to near the connector
one turn (2 time passes))
k
4-way
valve coil
1. Detachment
1) Following to work of Detachment of
c
, 1) to 5).
2) Cut the binding band A5 bundling up
4-way valve coil lead, TD sensor lead
Compressor lead, Compressor case thermo lead and
Fan motor lead.
3) Remove the 4-way valve coil.
(M5 screw)
2. Attachment
Attach the 4-way valve coil in the reverse process of
“ 1 Detachment ”.
∗
1 Fix the 4-way coil with its lead wire upward.
∗
2 Fix the clamp filter around the 4-way valve coil through
a commercially available binding band into the hole for
fixing binding band of clamp filter. (1 time pass)
Bundle the a ll le a d wires on
the ba ck f a ce a nd then cut the
b inding ba nd fixing inverter b ox.
PMV coil connector PMV coil connector
4-w a y v a lve 4-w a y v a lve
coil connector coil connector
Binding ba nd Binding ba nd
Binding ba nd Binding ba nd
Binding ba nd Binding ba nd
PMV coil connector
4-w a y v a lve
coil connector
Binding ba nd A1
Binding ba nd A2
Binding ba nd A5
Pipe cover Pipe cover
G a s side pipe
Li q uid side pipe Li q uid side pipe
Cut the b inding Cut the b inding
ba nd b undling ba nd b undling
up PMV coil le a d, up PMV coil le a d,
pipe cover, g a s pipe cover, g a s
side pipe a nd side pipe a nd
li q uid side pipe. li q uid side pipe.
Pipe cover
Li q uid side pipe
Cut the b inding
ba nd b undling
up PMV coil le a d,
pipe cover, g a s
side pipe a nd
li q uid side pipe.
Cut the b inding Cut the b inding
ba nd ba nd
b undling up b undling up
TO sensor Red TO sensor Red
TE sensor Bl
a ck, TE sensor Bl a ck,
TL sensor Blue, TL sensor Blue,
T
S sensor Gr a y, T S sensor Gr a y,
Pressure switch Pressure switch
(Bl
a ck tu b e), (Bl a ck tu b e),
Re a ctor le a d White, Re a ctor le a d White,
PMV coil le a d. PMV coil le a d.
Cut the b inding
ba nd
b undling up
TO sensor Red
TE sensor Bl
a ck,
TL sensor Blue,
T
S sensor Gr a y,
Pressure switch
(Bl
a ck tu b e),
Re a ctor le a d White,
PMV coil le a d.
PMV coil connector
Cl a mp filter 1roll (2 time p a sses) PMV coil
Binding ba nd A5
4-w a y v a lve 4-w a y v a lve
coil le a d wire coil le a d wire
Upper side) Upper side)
Cl a mp filter
one time p a ss
4-w a y v a lve
coil le a d wire
Upper side)
Inverter b ox